Friday, March 7, 2008

Jet Air Cleaner

Where to begin... The air cleaner I ordered (a Jet 1000B) actually arrived a day earlier than UPS predicted, unfortunately that meant my wife had to deal with the huge, heavy box, not me. Not a good start. It seemed to be fairly well packed, but that’s where the good things pretty much stopped. After wrestling it out of the packing material I sat it on the workbench and removed the packing braces from the inside, plugged it in and fired it up. Or at least I tried. It made a soft groaning noise and did nothing. So.. Unplug it, remove the filters and attempt to spin the fan by hand. It spins, but scrapes every revolution. Looks like the squirrel cage is out of alignment. Grab the allen wrenches, remove the 6 bolts that hold the fan assembly to the shell and try to back the shell out of the housing. The wires from the control panel (which is a completely exposed circuit board inside, no dust protection at all) are only a foot long. All but one are on a removable plug. The one that isn’t on the plug is bolted to the control panel, meaning that the whole panel has to be removed to get it loose. Once I finally got the fan housing out and got a close look at things I realized that two opposing arms of the motor mount (a cross shaped thing) are bent, one up, one down. Since there was no damage to the housing, it had to have been assembled this way. Gotta love that Taiwanese craftsmanship. 10 minutes of bending, tapping and banging and it was pretty much straight. However the squirrel cage still seemed to wobble a lot. It no longer hit anything though. So, I plugged it back in and fired it up. It’s running, but since I’m not certain how much noise it’s supposed to make, I’m not sure it it’s really fixed. Note: After reading a few more reviews (that, of course, I didn’t find when I did my original research) it looks like I still need to true up the squirrel cage itself. Since reports are that Jet won’t do it, they seem to think any fan that spins at all is “OK”, I decided to take a shot at it myself. I disassembled the thing again, stuck a 1/2 rod through the fan hub, laid the blade of one square across the top of it and used a second to check for squareness. After 30 minutes of tweaking it into something approaching square, I put it back together and fired it up. There’s still a little wobble, but it’s much harder to see and the unit is running much quieter and with far less vibration. Looks like I’ll be keeping it as long as the mounting goes OK.

A few smaller annoyances:
  • The remote only works from the back side of the unit, which means that I’ll have to walk over to the garage side of my shop to turn it on, not a major issue, but not exactly convenient.
  • In the usual method of “cost savings” these days they don’t give you the bolts or chains to actually hang it, you’ve got to provide them yourself.
Now I just need to run an outlet from the garage breaker panel to a location near my chosen mounting spot and find either a 7 foot tall circus strongman or a couple of friends with good backs and ladders to help me get it mounted to the ceiling. Maybe I’ll wire that emergency light I got from Dave in while I’m at it...

No comments:

Post a Comment